Completion Bonds, Explained: What the Bond Covers, Who Requires It, and When a Budget Needs One | American Film Association

Film Finance Guides

Completion Bonds, Explained: What the Bond Covers, Who Requires It, and When a Budget Needs One

A completion bond is an insurance policy on the production itself. Who requires one, where it sits in the budget, when the $2.5 to $3 million range makes it expected, and how it differs from contingency and the SAG bond.

A completion bond is an insurance policy on the production itself. It stands behind one promise: the film gets finished and delivered, or the money people put in is protected when it cannot be. In Austin Spicer's teaching at the American Film Association, the bond stops being optional at a clear budget level. Around $2.5 million you should seriously consider one, and at the $3 million range you should definitely have one, because that is too much money to ask an investor to commit without some form of insurance behind it. This guide is for producers building a budget in that range, and for anyone whose financing plan uses lenders against a tax credit or pre-sales, because those lenders often require the bond before they lend. It covers what the bond is, where it sits in the budget, who requires it, and the two things it gets confused with: contingency and the SAG bond.

What the bond actually insures

Spicer explains the bond to his students with a production disaster. You shoot the movie. You are in post. The hard drives get wet, and now you do not have a movie. The money has been spent, the footage is gone, and every person who financed the film is looking at a total loss on a film that will never exist in a deliverable form.

That is the risk the bond answers. A completion bond is, in his words, pretty much an insurance policy. It is taken out on the production so that if the film cannot be completed and delivered, the people who put money in are not simply out the money. The bond does not insure the film's performance. It says nothing about box office, streaming value, or whether investors turn a profit. It insures the earlier and more basic event: that a finished film comes out the other end of production at all.

That distinction matters when you talk to investors. A bond is protection against catastrophe during production. Profit is a separate question, answered by the capital stack, the sales plan, and the recoupment waterfall. A producer who presents a bond as if it makes an investment safe is overselling it. A producer who presents it accurately, as the policy standing behind delivery, is describing exactly what financiers at this budget level expect to see.

Where the bond sits in the budget

The bond is a line item, and it belongs in the budget from the first draft, not added after the financing is negotiated. Walking his students through a budget top sheet, Spicer points to the closing sections of the budget: post-production, then the "others" category, where contingency sits and where the completion bond sits beside it.

Those two lines are easy to blur, and they do different jobs.

Contingency is the production's own cushion. Spicer teaches it at typically 8 to 10 percent of the below-the-line cost, and it exists for the unexpected costs that arrive on every shoot: a lost day, a location problem, an equipment failure. Contingency gets spent, in whole or in part, on ordinary trouble.

The completion bond covers the other end of the scale. It is not there for a bad week. It is there for the scenario where the production fails outright and no deliverable film exists. A budget can carry a healthy contingency and still leave financiers fully exposed to that scenario, because contingency is spent inside the production and is gone by the time a catastrophe finishes unfolding.

So the top sheet at this budget level carries both lines, on purpose. Contingency absorbs the surprises. The bond stands behind the delivery promise. Leaving the bond line out of a $3 million budget does not make the film cheaper to finance. It usually means the requirement surfaces later, mid-negotiation, when adding it is more disruptive.

When the budget level makes a bond expected

Spicer gives his students two markers, and they are worth keeping separate.

The first is a consideration point. Reviewing a student's $2.5 million budget, he stops at the bond line: "if your budget's at 2.5, you should really consider and think about a completion bond." At that level the film is carrying real money, union flip risk lives in the same budget band, and the package has usually started to involve lenders or investors who will ask about protection.

The second marker is firmer. Asked directly in a 3-Day Challenge session how attractive a completion bond is to an investor, he answers from the $3 million range: "you should definitely, definitely have a completion bond, because it's too much money to ask an investor to put into without some sort of insurance policy." Having the bond in place, or at minimum having identified who will provide it, is, in his words, super important before you go asking for that level of money.

Below that band, his sessions do not call for a bond, and a micro-budget film is not expected to carry one. The teaching is a gradient, not a rule for every budget: the bond becomes part of a professional package as the budget climbs into the range where outside financiers are exposed to seven figures of production risk.

Who requires it

The requirement usually arrives through the financing, not through a law or a guild.

Spicer teaches that some lenders will require a bond in place as a condition of lending. He names the lenders his students deal with most: the ones who lend against the tax credit and the ones who lend against pre-sales. Their position explains the requirement. A lender advancing money against a tax credit or a set of minimum guarantees is lending against value that only exists if a finished film gets delivered and the credit is earned. If production collapses, the collateral collapses with it. The bond is how that lender covers the gap between money out the door and a film that may never arrive.

Investors read the bond the same way. At the $3 million range, an investor being asked for a serious check treats the bond as a safe insurance policy for their investment, and its absence becomes a question the producer has to answer. Entertainment attorney Joseph Lanius, speaking in an AFA masterclass, added a practical point producers feel during the raise: whether a production has a completion bond or not bears on how financing can be drawn down, including whether money can arrive in tranches rather than one lump sum. Bonded productions are simply easier for financiers to structure around.

The practical order follows from this. The bond is lined up during packaging, while the budget and the capital stack are being built, so the producer can walk into lender and investor conversations with the protection already identified. A bond arranged after the term sheet is a delay. A bond arranged before it is a selling point.

The mistakes

Leaving the bond out of the budget is the common one. The producer builds the stack, the numbers work, and then a lender requires a bond that was never budgeted. The fee has to come from somewhere, the stack reopens, and the delay lands in the middle of the raise. Spicer teaches the budget as the spine of the package for a reason: every requirement the financing will impose belongs in it early, priced, where investors can see it.

Confusing the bond with contingency is the second. A producer points at a 10 percent contingency line and calls the production protected. Contingency is spent money waiting for ordinary trouble. It is not insurance, and no lender treats it as a substitute for a bond.

Confusing the completion bond with the SAG bond is the third, and it is a vocabulary problem with real consequences. The SAG bond is a guild requirement, a security deposit the union requires, usually on productions of $3 million or higher. It protects performers' pay under the guild agreement. The completion bond protects the financiers against non-delivery. A budget at $3 million may well carry both, for different people, against different risks. Naming one when you mean the other, in a budget review or an investor meeting, signals that the package was assembled without understanding either.

Frequently asked questions

Is a completion bond the same thing as the SAG bond?

No. The SAG bond is a deposit required by the performers' union, usually on productions of $3 million or higher, and it secures money owed under the guild agreement. A completion bond is an insurance policy on the production, arranged for the benefit of the people financing the film, standing behind completion and delivery. Same budget neighborhood, different instrument, different beneficiary.

My budget is under $2.5 million. Do I need a bond?

Austin Spicer's teaching raises the bond at the $2.5 million mark and treats it as expected at $3 million. Below that band his sessions do not call for one, and micro-budget films are not expected to carry one. The exception is a lender who requires it as a condition of a loan at any budget. If your financing includes that condition, the bond is part of your package whatever the budget says.

When should I arrange the bond?

During packaging, before the raise. In Spicer's teaching, having the completion bond, or having identified the provider who will issue it, is part of what makes a $3 million ask credible. Producers who wait until a lender demands it end up renegotiating a finished budget under time pressure.

Does a completion bond guarantee that investors make money?

No. The bond insures completion and delivery. It does not insure revenue, and it does not promise anyone a return. Whether investors make money depends on the film's sales, the capital stack, and the order of the recoupment waterfall. The bond answers the question "what happens if the film is never finished." It does not answer "what happens if the film does not sell."

What does a completion bond cost?

The bond is priced into the budget as its own line item, and the price is set by the provider against your budget and package. Build the line into the top sheet from the start. A budget at this level that shows no bond line will be read by lenders and investors as a budget that has not yet faced the question.

The American Film Association teaches film financing structure through its programs and guides. AFA does not provide film financing or capital, and it does not issue bonds or insurance. What it teaches is how a package is put together so that the protections financiers expect are in place before the money is asked for.